Softfuga Polimeric Binders and Reamed Sand Compound
Polimeric binders and reamed sand compound
Range of use
A mixture of polimeric sealants and sand to be used as a grout for natural stone floors. It hardens once you add water and remains stable preventing the growing of weeds and the washing out due to rain, wind and frost. It’s the ideal solution for swimming pools edges, garage ramps and any other inclined surface. The base must be made of draining sand or crushed stone, no simple sand or concrete.
• Dilations and vibrations absorbing.
• Not altering the stone colour
• Unalterable in time.
• Easy to use.
Fill in the dry paving joints with Softfuga by minimum 1% inclination (1cm every mt).Remove the excess product maintaining the Softfuga level 3 mm under the paving level. Scatter the sand and water the surface: attention, do not flood the paving or use a pressure jet) for about 30 seconds. Do not pass on the surface for at least 4 hours. Do not use in case of temperatures under 10° C, or on wet surfaces, in case of rain possibility before 3 hours have passed, if the paving stones are lay on concrete or non-draining materials or on a less than 15 cm thick layer of draining material. A mixt of polymeric binders and selected sand for the joint filling in natural stone paving. It hardens by adding water, blocks joints and fixes the paving stones, prevents weeds from growing and joints to get emptied by the rain, wind and frost action. It is the ideal solution for pools coping, garage ramps or any other inclined surface. Foresee a draining sand or chipping sand; do not use on concrete and sand bases.